0-2035-7200 (English)

The APs and wireless router if used must be within range of each other. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. My IP Address: Enter a name for your new schedule.

Setup D-Link DAP - Linux Mint Community

Web-based management through Microsoft Internet Explorer 6 or higher,firefox 1. You are now ready to follow one of our other guides. This is the name you give your local network so you can find it again later when needed. You can use "any' computer to access the router's admin pages; and I note you have a MacBook Click the LAN Settings button.

Default Gateway: Select Repeater from the drop-down menu. Set DNS manually: Awaiting official review. Account Name: If you have a different operating system, the screenshots on your computer will look similar to the following examples.

DAP - N Wireless Access Point Vietnam

Follow these instructions: This feature enables client isolation. Enter a maximum idle time during which the Internet connection is maintained during inactivity.

Enter the appropriate security key or passphrase in the field provided and then click the Connect button. A destination could be another computer, or a URL. Subnet Mask: This button clears all current log content.

A wireless local area network WLAN is a cellular computer network that transmits and receives data with radio signals instead of wires. Select Admin and then enter your password. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office.

Mixed You can save the log files under Log Setting.